Introducing atmospheric attenuation within a diffusion model for room-acoustic predictions

This paper presents an extension of a diffusion model for room acoustics to handle the atmospheric attenuation. This phenomenon is critical at high frequencies and in large rooms to obtain correct acoustic predictions. An additional term is introduced in the diffusion equation as well as in the diffusion constant, in order to take the atmospheric attenuation into account. The modified diffusion model is then compared with the statistical theory and a cone-tracing software. Three typical room-acoustic configurations are investigated: a proportionate room, a long room and a flat room. The modified diffusion model agrees well with the statistical theory (when applicable, as in proportionate rooms) and with the cone-tracing software, both in terms of sound pressure levels and reverberation times.     

Effectiveness of ultrasound for the destruction of Mycobacterium sp. strain (6PY1)

Ultrasound is widely used to disinfect drinking water and wastewater due to its strong physical and chemical effects on microorganisms. The aim of this study was to investigate the effect of ultrasound on the destruction of Mycobacterium strain 6PY1. Ultrasound waves (20 kHz or 612 kHz) were used to treat aqueous suspensions of Mycobacterium at different volumes, initial bacterial concentrations, and power densities. At the same power density and the same exposure time, sonication at high frequency resulted in a lower destruction of Mycobacterium sp. 6PY1 (35.5%) than sonication at low frequency (93%). The percentage of removal was not significantly affected by the volume of the irradiated suspension (150–300 ml) or the initial cell concentration (2.15 × 10⁻³–1.4 × 10⁻² mg protein L⁻¹). At low frequency, the removal percentage of Mycobacterium sp. 6PY1 increased with increasing the power density, with a constant level reached after a certain power density. At high frequency, the removal percentage of Mycobacterium sp. 6PY1 increased with increasing the power density. The mechanism of cell killing was investigated by examining the effects of OH radical scavengers such as sodium carbonate. At high frequency the presence of sodium carbonate suppressed the removal process. However, at low frequency the removal process was not affected, thus indicating that OH radicals have a negligible role in this case. The latter result was supported by ten time’s H₂O₂ production at high frequency greater than that at low frequency.     

Hydrophobic encapsulation of hydrocarbon gases

[reaction: see text] Encapsulation data for hydrophobic hydrocarbon gases within a water-soluble hemicarcerand in aqueous solution are reported. It is concluded that hydrophobic interactions serve as the primary driving force for the encapsulation, which can be used for the design of gas-separating polymers with intrinsic inner cavities.     

Targeted metabolomics in cultured cells and tissues by mass spectrometry: Method development and validation

Metabolomics is the identification and quantitation of small bio-molecules (metabolites) in biological samples under various environmental and genetic conditions. Mass spectrometry provides the unique opportunity for targeted identification and quantification of known metabolites by selective reaction monitoring (SRM). However, reproducibility of this approach depends on careful consideration of sample preparation, chemical classes, and stability of metabolites to be evaluated. Herein, we introduce and validate a targeted metabolite profiling workflow for cultured cells and tissues by liquid chromatography–triple quadrupole tandem mass spectrometry. The method requires a one-step extraction of water-soluble metabolites and targeted analysis of central metabolites that include glycolysis, amino acids, nucleotides, citric acid cycle, and the hexosamine biosynthetic pathway. The sensitivity, reproducibility and molecular stability of each targeted metabolite were assessed under experimental conditions. Quantitation of metabolites by peak area ratio was linear with a dilution over a 4 fold dynamic range with minimal deviation R² = 0.98. Inter- and intra-day precision with cells and tissues had an average coefficient of variation <15% for cultured cell lines, and somewhat higher for mouse liver tissues. The method applied in triplicate measurements readily distinguished immortalized cells from malignant cells, as well as mouse littermates based on their hepatic metabolic profiles.     

氮掺杂碳纳米管负载的Ru和Pd催化剂上异丙醇的转化(英文)

Ru and Pd (2 wt%) loaded on pure and on Ndoped carbon nanotubes (NCNTs) were prepared and tested using the isopropyl alcohol decomposition reaction as probe reaction. The presence of nitrogen functionalities (pyridinic, pyrrolic, and quaternary nitrogen) on the nitrogen doped support induced a higher metal dispersion: Pd/NCNT (1.8 nm) Pd/CNT (4.9 nm), and Ru/NCNT (2.4 nm) Ru/CNT (3.0 nm). The catalytic activity of the supports was determined first. Isopropyl alcohol conversion produces acetone on CNTs while on NCNTs it led to both dehydration and dehydrogenation products. At 210 °C and in the presence of air, the isopropyl alcohol conversion was higher on the NCNTs (25%) than on the CNTs (11%). The Pd loaded catalysts were more active and more selective than the Ru ones. At 115 °C, the Pd catalysts were 100% selective towards acetone for a conversion of 100%, whereas the Ru catalysts led to dehydration and dehydrogenation products. The nitrogen doping induced the appearance of redox properties when oxygen is present in the reaction mixture.     

Interdigitated comb-like electrodes for continuous separation of malignant cells from blood using dielectrophoresis

In this paper, a method for continuous flow separation of circulating malignant cells from blood in a microfluidic device using dielectrophoresis is discussed. Separation of MDA231 breast cancer cells after mixing with normal blood cells was achieved with a level of accuracy that enabled precise counting of the malignant cells, separation and eventually, sub-culturing. MDA231 cells were separated from the blood to a daughter channel using two pairs of interdigitated activated comb-like electrode structures. All experiments are performed with conductivity adjusted medium samples. The electrode pairs were positioned divergent and convergent with respect to the flow. The AC signals used in the separation are 20 V peak-to-peak with frequencies of 10-50 kHz. The separation is based on balance of magnitude of the dielectrophoretic force and hydrodynamic force. The difference in response between circulating malignant cells and normal cells at a certain band of alternating current frequencies was used for rapid separation of cancer cells from blood. The significance of these experimental results is discussed in this paper, with detailed reporting on the suspension medium, preparation of cells, flow condition and the fabrication process of the microfluidic chip. The present technique could potentially be applied to identify incident cancer at a stage and size that is not yet detectable by standard diagnostic techniques (imaging and biochemical testing). Alternatively, it may also be used to detect cancer recurrences.     

Structural reinvestigation of the core oligosaccharide of a mutant form of Aeromonas salmonicida lipopolysaccharide containing an O-4 phosphorylated and O-5 substituted Kdo reducing end group using electrospray QqTOF-MS/MS

The molecular structure of the mutant form of the lipopolysaccharide of Aeromonas salmonicida was determined to contain an O-4 phosphorylated and O-5 substituted Kdo reducing group, and is proposed as the following: [molecular structure: see text] It was established that during the cleavage of this LPS with 1% acetic acid, to release the core oligosaccharide from the Lipid A portion, we obtained a degraded core oligosaccharide which eliminated its phosphate group with extreme facility. The precise molecular structure of this dephosphorylated core was deduced by electrospray mass spectrometry and is proposed as the following:[molecular structure: see text] Low energy collision ESI-QqTOF-MS/MS analysis of the dephosphorylated core oligosaccharide confirmed the presence of the O-5 glycosylated 4,8- and 4,7-anhydro derivatives of the enolizable alpha-keto-acids. The CID tandem mass spectrometric analysis of the heterogeneous mixture of the permethylated core oligosaccharide established the unreported methylation reaction on the diastereomeric 4,8- and 4,7-anhydro alpha-keto-acids and the complete permethylation and addition reaction of the O-5 glycosylated open chain reducing end terminal D-arabino-3-en-2-ulonic acid. The stereo-specific fragmentation routes obtained during the tandem mass spectrometric analysis permitted the precise sequencing of this dephosphorylated rough core oligosaccharide of the mutant LPS of A. salmonicida.     

Elucidation of the molecular structure of lipid A isolated from both a rough mutant and a wild strain of Aeromonas salmonicida lipopolysaccharides using electrospray ionization quadrupole time-of-flight tandem mass spectrometry

The chemical structure of lipid A, isolated by mild acid hydrolysis from a rough mutant and a wild strain of Aeromonas salmonicida lipopolysaccharide, was investigated using electrospray ionization quadrupole time-of-flight (QqToF) hybrid tandem mass spectrometry and showed a great degree of microheterogeneity. The chemical structure of the main constituent of this heterogeneous mixture was identified as a beta-D-(1 --> 6) linked D-glucosamine disaccharide substituted by two phosphate groups, one being bound to the non-reducing end at position O-4' and the other to the position O-1 of the reducing end of the D-glucosamine disaccharide. The location of the fatty acids linked to the disaccharide backbone was established by identifying diagnostic ions in the conventional QqToF-MS scan. Low-energy collision tandem mass spectrometry analysis of the selected precursor diagnostic ions confirmed, unambiguously, their proposed molecular structures. We have established that myristyloxylauric (C14:0(3-O(12:0))) acid residues were both N-2' and O-3' linked to the non-reducing end of the D-GlcN residue, and that two 3-hydroxymyristic (C14:0(3-OH)) acid chains acylated the remaining positions of the reducing end. The MS and MS/MS data obtained allowed us to determine the complex molecular structure of lipid A. The QqToF-MS/MS instrument has shown excellent superiority over a conventional quadrupole-hexapole-quadrupole tandem instrument which failed to fragment the selected precursor ion.     

Design of leaky modes of two-dimensional photonic crystal slabs to enhance the luminescence from Er3N@C80 fullerenes

We develop an effective way to engineer a two-dimensional GaAs photonic crystal slab with its leaky eigenmodes at desired wavelengths by investigating its spectral dispersion, particularly in terms of transmission efficiency spectra at different launch angles of the light beam. Structural parameters for the photonic crystal slab with leaky eigenmode wavelengths at both 1492 nm and 1519 nm are obtained. This may lead to the enhanced luminescence from erbium-doped trinitride-template fullerenes (Er₃N@C₈₀) on the surface of the photonic crystal slabs.     

Propagation of p-polarized waves in a linearly graded index film surrounded by negative index materials

The theory of step-index waveguides is well-established. Most practical slab waveguide structures have a graded-index profile. The basic properties of graded-index planar waveguide structures are similar to those of step-index waveguides with subtle differences. The most common types of graded-index slab waveguides are linearly and exponentially graded-index profiles. We here treat linearly graded-index slab waveguide. In this work, a three-layer waveguide structure with linearly graded-index film is considered. We assume three structures: the first structure comprises a left-handed material (LHM) cladding, the second structure contains a LHM substrate layer and the third has a LHM cladding and substrate. Closed-form expressions for electric and magnetic fields and the characteristic equation are derived. The three normalized parameters: the asymmetry coefficient (a), the normalized film thickness (V) and the normalized guide index (b) are used to study the dispersion properties of the proposed slab waveguide structure.